Cavalier L4-2.2L VIN 4 (1998)
Valve Body: Service and Repair
Valve Body Cover Replacement
REMOVAL PROCEDURE
1. Disconnect the negative battery cable.
CAUTION: Refer to Battery Disconnect Caution in Service Precautions.
2. Remove the transmission bracket.
3. Remove the control valve body cover bolts.
4. Remove the control valve body cover.
5. Remove the valve body cover gasket.
6. Determine if the washer is inverted on the bolts.
IMPORTANT: Use Sealant compound GM P/N 12345282, or equivalent in order to reduce the potential for oil leaks on bolts.
INSTALLATION PROCEDURE
