Cavalier L4-2.2L VIN 4 (1998)
3. Install the clutch cover to flywheel bolts.
3.1. Follow the tightening sequence. Tighten the bolts to 16 Nm (12 ft. lbs.).
3.2. Tighten the bolts to specifications. Refer to Fastener Tightening Specifications.
NOTICE: Refer to Fastener Notice in Service Precautions.
4. Lubricate the inside diameter of the bearing with GM P/N 12345777, or equivalent.
5. Install the transmission. Refer to Transmission Replacement in Manual Transmission.
6. Install the clutch master cylinder assembly to the clutch actuator cylinder.
7. Connect the clutch actuator cylinder line.
8. Bleed the hydraulic system. Refer to Hydraulic Clutch Bleeding.
9. Connect the negative battery cable.
