Cavalier L4-2.2L VIN 4 (1998)
21. Remove the inner race (1) from the cage (2) by rotating the inner race (1) upward.
22. Clean the inner and outer race assemblies, the CV joint cage and the chrome alloy balls thoroughly with cleaning solvent. Remove all traces of old
grease and any contaminates.
23. Dry all the parts.
24. Check the CV joint assembly for unusual wear, cracks, or other damage.
25. Replace any damaged parts.
26. Clean the halfshaft bar. Use a wire brush to remove any rust in the boot mounting area (grooves).
ASSEMBLY PROCEDURE
^
Tools Required
-
J 35910 Seal Clamp Tool
1. Put a light coat of grease from service kit on the ball grooves of the inner race and the outer race.
2. Hold the inner race 90 degrees to the centerline of the cage with the lands of the inner race (1) aligned with the windows of cage (2).
3. Insert the inner race into the cage.
4. Hold the cage and the inner race 90 degrees to the centerline of the outer race. Align the cage windows (3) with the lands of the outer race (2).
