Cavalier L4-2.2L VIN 4 (1998)
Wheel Bearing: Service and Repair
Front
FRONT WHEEL BEARINGS AND/OR HUB
REMOVAL PROCEDURE
^
Tools Required:
-
J 28733-B Front Hub Spindle Remover
1. Remove the drive axle. Refer to WHEEL DRIVE SHAFTS REPLACEMENT in Drive Axles, Bearings and Joints.
2. Remove brake caliper bolts and support caliper. Refer to BRAKE CALIPER REPLACEMENT in BRAKES.
3. Remove the rotor. Refer to ROTOR REPLACEMENT in HYDRAULIC BRAKES.
4. Remove the bolts (1) from the hub and bearing assembly (3).
5. Remove the hub and bearing assembly (1) from the steering knuckle (2).
INSTALLATION PROCEDURE