chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Door Inside Handle and Power Door Lock Switch|Page 11245 > < Door Inside Handle and Power Door Lock Switch
Page 2
background image

INSTALL OR CONNECT

1. (Front Door Only) Door lock switch wire harness.
2. Pull door inside handle to the full open position.
3. Insert front tab on door inside bezel to locating notch behind front edge of opening in door trim panel.
4. Push door inside bezel downward to insert lower tab behind lower edge of door trim panel.
5. Insert rear most lowest tab of door inside bezel to edge of door trim panel.
6. Snap into place the top two tabs on door inside bezel.

Door Inside Handle and Power Door Lock Switch|Page 11245 > < Door Inside Handle and Power Door Lock Switch