Cavalier L4-2.2L VIN 4 (1998)
REMOVAL PROCEDURE
1. Remove the screw (5).
2. Remove the upper front panel (4).
3. Remove the mirror patch filler (3).
INSTALLATION PROCEDURE
1. Install the mirror patch filler (3).
2. Install the upper front panel (4).
NOTE: Refer to Fastener Notice in Cautions and Notices.
3. Install the screw (5).
Tighten
Tighten the screw to 1 Nm (12 lb in).
Power Window Switch Replacement
POWER WINDOW SWITCH (HARDTOP)
REMOVAL PROCEDURE
1. Use a flat-bladed screwdriver in order to pry the power window switch outward.
2. Disconnect the power window switch wire harness.
3. Remove the power window switch.
INSTALLATION PROCEDURE
1. Connect the power window switch wire harness.
2. Install the power window switch. Ensure the unit is retained.
Window Regulator Handle Replacement
WINDOW REGULATOR HANDLE REPLACEMENT
REMOVAL PROCEDURE
