Cavalier L4-2.2L VIN 4 (1998)
Wiper Motor: Service and Repair
Wiper Motor Cover Replacement
REMOVAL PROCEDURE
1. Remove the wiper arms.
2. Remove the plenum chamber water deflector.
3. Remove the three screws and the wiper motor cover from the wiper motor.
4. Disconnect the electrical connector from the wiper motor.
INSTALLATION PROCEDURE
NOTE: Reter to Fastener Notice in Cautions and Notices.
1. Install the wiper motor cover onto the wiper motor with the three screws.
Tighten
Tighten the three screws to 2 N.m (18 lb in).
2. Install the plenum chamber water deflector.
3. Install the wiper arms.
4. Operate the wipers and inspect for proper operation.