Cavalier L4-2.2L VIN F (2004)
IMPORTANT:
-
Align the inner and outer antenna couplings.
-
Do not touch the adhesive backing on the antenna coupling.
-
The RF connections for the inner antenna coupling should run parallel to the defogger gridline.
1. Align the inner antenna coupling to the outer antenna coupling, or to the locating marks on the rear window above the defogger grid line.
2. Press firmly on all 4 corners and on the center of the antenna inner coupling (2) in order to ensure proper adhesion to the rear window (4). Hold
pressure on the inner coupling (2) for 10-30 seconds.
3. Ensure that no gaps occur between the couplings (2,5) and the rear window (4).
4. Connect the coaxial cable to the inner coupling (2).
