Cavalier L4-2.2L VIN F (2004)
Body Control Module: Removal and Replacement
BODY CONTROL MODULE REPLACEMENT
REMOVAL PROCEDURE
1. Disconnect the negative battery cable.
CAUTION: Refer to Battery Disconnect Caution in Service Precautions.
2. Release the body control module (BCM) wire harness retainer from the BCM bracket.
3. Disconnect the BCM electrical connectors from the BCM.
4. Release the lock tabs and remove the BCM from the BCM bracket.
5. Remove the BCM bracket nuts (2) if required.
6. Remove the BCM bracket (1) as an assembly if required.
INSTALLATION PROCEDURE