Cavalier L4-2.2L VIN F (2004)
6. Remove the center fastener that attaches the fascia to the fender. Access the fastener from the top, through the headlamp openings.
7. Disengage the fascia from the shoulder bolts by pulling the fascia outward at the fenders.
8. Remove the front bumper fascia from the vehicle.
Installation Procedure
1. Position the front bumper fascia on the vehicle.
2. Push the fascia onto the shoulder bolts at the fender joint.
Notice: Refer to Fastener Notice in Service Precautions.
3. Accessing through the headlamp opening, install the bolt that attaches the fascia to the fender.
Tighten the bolt to 9 N.m (80 lb in).