Cavalier L4-2.2L VIN F (2004)
Trunk / Liftgate Shock / Support: Service and Repair
Rear Compartment Lid Hinge Torque Rod Replacement
Rear Compartment Lid Hinge Torque Rod Replacement
Tools Required
*
J 39384-10Torsion Rod Adjustment Bar
*
J 39719Trunk Deck Lid Torsion Rod Adjuster
Removal Procedure
Caution: When a hood hold open device is being removed or installed, provide alternate support to avoid the possibility of damage to the
vehicle or personal injury.
1. Prop the compartment lid (2) in the full-open position.
2. Use the J 39719, the J 39384-10 or the equivalent (6) in order to remove the torque rod (5) from the adjusting notch.
3. With the torque rod removed from the adjuster notch, push the rod out of the hinge arm.
4. Remove the torque rod (1) from the rear compartment lid hinge (4).
Installation Procedure
