Cavalier L4-2.2L VIN F (2004)
4. Install the Cavalier LS emblem/nameplate to the following dimensions:
*
Dimension (a) is 43 mm (1.688 in) from the left edge of the rear compartment lid to the nameplate.
*
Dimension (b) is 45 mm (1.750 in) from the bottom edge of the rear compartment lid to the nameplate.
*
Dimension (c) is 235 mm (9.250 in) from the left edge of the rear compartment lid to the LS nameplate.
*
Dimension (d) is 45 mm (1.750 in) from the bottom edge of the rear compartment lid to the nameplate.
5. Heat the mounting surface to approximately 27-41°C (80-105°F) using the J 25070, if necessary.
6. Ensure that the temperature of the emblem/nameplate is approximately 29-32°C (85-90°F).
Important: Do not touch the adhesive backing on the emblem/nameplate.
7. Remove the protective liner from the back of the emblem/name plate.
8. Position the emblem/nameplate to the location marks and press the emblem/nameplate to the mounting surface.
9. Apply equal pressure along the emblem/nameplate to uniformly bond the item to the mounting surface.
10. Remove the protective tape from the mounting surface.
