Cavalier L4-2.2L VIN F (2004)
4. Install the 3 remaining tumblers, key cut positions 8, 9 and 10, into the cylinder.
5. Snap the tumblers into place with light hand pressure.
6. Inspect for the correct loading of the tumblers (1) by inserting the key into cylinder (3). All of the tumblers should be flush with the lock cylinder.
Power Accessory Receptacle Replacement - Floor Console
ACCESSORY POWER RECEPTACLE REPLACEMENT - FLOOR CONSOLE
TOOLS REQUIRED
J 42059 Cigarette Lighter Socket Remover
REMOVAL PROCEDURE
1. Remove the power accessory port fuse.
2. Remove the power accessory port access cover.
3. Remove the power accessory port housing by placing one side of the "T" portion of J 42059 into the tab window. Angle the other side into the
opposite tab window. Pull the power accessory port housing straight out.
4. Remove J 42059 from the power accessory port housing.
5. Disconnect the electrical connector from the power accessory port housing.
6. Using your index finger pull out the power accessory port retainer.