chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Headliner|Service and Repair|Page 7555 > < Headliner|Service and Repair|Page 7553
Page 3
background image

Notice:  Use care when removing or installing the headliner. Excessive bending will damage the headliner.

1. Install the dome lamp assembly (7) to the headliner (1), if required.
2. Position the headliner (1) in the vehicle.
3. Connect the coaxial cable connectors (2) to the digital radio antenna, if equipped.
4. Position the headliner (1) to the vehicle roof.
5. Install the push-in retainers (5) to the headliner (1).
6. If the vehicle is equipped with a GPS sensor, perform the following procedure:

1. Connect the coaxial cable connector to the GPS sensor.
2. Install the rosebud clips retaining the GPS sensor coaxial cable harness (9) to the upper rear quarter panel.

7. If the vehicle is equipped with a digital radio, perform the following procedure:

1. Connect the coaxial cable connector to the digital radio receiver.
2. Install the rosebud clips retaining the coaxial cable harness (10) to the upper rear quarter panel and the rear shelf.

8. Connect the electrical connector (4) for the rear view mirror, if required.
9. If equipped with OnStar(R) perform the following procedure:

1. Connect the coaxial cable connector (8) for the OnStar(R) cellular antenna.
2. Route the OnStar(R) coaxial cable harness (3) through the opening along the windshield pillar.
3. Install the rosebud clips retaining the OnStar(R) coaxial cable harness (3) to the windshield pillar.
4. Connect the coaxial cable connectors to the OnStar(R) module.

10. Route the dome lamp wire harness (6) through the opening in the windshield pillar.

On the Cavalier install the I/P carrier.

11. Install the rosebud clips retaining the dome lamp wire harness (6) to the windshield pillar.

Headliner|Service and Repair|Page 7555 > < Headliner|Service and Repair|Page 7553