chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Procedures|Page 7867 > < Sunroof / Moonroof Panel|Adjustments|Page 7862
Page 1
background image

Sunroof / Moonroof Weatherstrip: Procedures

SUNROOF SEAL/MOLDING REPLACEMENT

REMOVAL PROCEDURE

1. Remove the sunroof window.

2. Remove the weatherstrip by pulling the weatherstrip (1) away from the glass panel.

INSTALLATION PROCEDURE

1. Align the butt joint with the center of the sunroof window on the passenger side of the vehicle.

2. Work the weatherstrip into the channel in the glass panel frame. Continue to work the weatherstrip (1) until the weatherstrip is firmly press fit into

the channel. Install the weatherstrip around the entire sunroof glass panel.

Procedures|Page 7867 > < Sunroof / Moonroof Panel|Adjustments|Page 7862