Cavalier L4-2.2L VIN F (2004)
Sunroof / Moonroof Wiring Harness: Service and Repair
SUNROOF WIRING HARNESS REPLACEMENT
REMOVAL PROCEDURE
1. Remove the headlining trim finish panel.
2. Disconnect the electrical connector from the following components:
2.1.
The sunroof control switch (3)
2.2.
The sunroof express module (2)
2.3.
The sunroof motor (4)
2.4.
The body harness (1).
3. Remove the wiring harness from the sunroof.
IMPORTANT:
-
Note the location of the wiring harness.
-
Note the location of the tie-straps that secure the harness to the drive cables and to the sunroof module.
INSTALLATION PROCEDURE
1. Install the wiring harness to the sunroof.
2. Connect the electrical connector to the following components:
2.1.
The body harness (1)
2.2.
The sunroof control switch (3)
2.3.
The sunroof express module (2)
2.4.
The sunroof motor (4)
3. Install the headlining trim finish panel.
4. Inspect the sunroof for proper operation.
