Cavalier L4-2.2L VIN F (2004)
Seat Cover: Service and Repair
Front Seat Cushion Cover Replacement
Front Seat Cushion Cover Replacement
Removal Procedure
Caution: When performing service on or near the SIR components or the SIR wiring, the SIR system must be disabled. Refer to SIR
Disabling and Enabling. Failure to observe the correct procedure could cause deployment of the SIR components, personal injury, or
unnecessary SIR system repairs.
1. Disable the SIR system, if equipped with Side Impact Air Bag (SIAB). Refer to SIR Disabling and Enabling, or SIR Disabling and Enabling in
Restraint Systems.
2. Remove the front bucket seat.
3. Remove the front seat back from the seat cushion.
4. Disconnect the front bucket seat cover J-hook retainers (2) from the front seat cushion frame (3).
5. Remove the front seat cover and pad (1) from the seat frame (3).
Installation Procedure
1. Position the front seat pad and cover (1) to the front seat cushion frame (3).
2. Connect the front seat pad and cover J-hook retainers (2) to the front seat cushion frame (3).
3. Install the front bucket seat back to the front seat cushion.
4. Install the front bucket seat.
5. Enable the SIR system, if equipped with SIAB. Refer to SIR Disabling and Enabling, or SIR Disabling and Enabling in Restraint Systems.
