Cavalier L4-2.2L VIN F (2004)
Notice: Refer to Fastener Notice in Service Precautions.
4. Install the seat belt buckle bolt.
Tighten the bolt to 34 N.m (25 lb ft).
5. Install the seat adjusters to the seat frame.
6. Install the seat cushion to the seat back.
7. Enable the SIR system, if equipped with SIAB. Refer to SIR Disabling and Enabling or SIR Disabling and Enabling in Restraint Systems.
Seat Cushion Outer Trim Panel Replacement
Seat Cushion Outer Trim Panel Replacement
Removal Procedure
1. Remove the screws from the front bucket seat cushion outer trim panel.
2. Remove the front seat cushion outer trim panel from the front seat recliner mechanism.
Installation Procedure
1. Install the seat bucket cushion outer trim panel to the front seat recliner mechanism.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the screws to the front bucket seat cushion outer trim panel.
Tighten the screws to 1.9 N.m (17 lb in).
Front Seat Cushion Replacement
Front Seat Cushion Replacement
Removal Procedure
Caution: When performing service on or near the SIR components or the SIR wiring, the SIR system must be disabled. Refer to SIR
Disabling and Enabling. Failure to observe the correct procedure could cause deployment of the SIR components, personal injury, or
unnecessary SIR system repairs.
