Cavalier L4-2.2L VIN F (2004)
14. Remove the EBCM/BPMV assembly to mounting bracket bolt.
15. Remove the EBCM/BPMV assembly from the vehicle.
16. Remove the 4 EBCM-to-BPMV retaining bolts.
Important:
^
Do not pry apart the EBCM (1) from the BPMV (2) using a tool. Be careful not to damage seal on the EBCM or the mating surface of the BPMV.
^
Care must be taken not to damage the solenoids when the EBCM is removed from the BPMV.
17. Separate the EBCM (1) from the BPMV (2) by carefully pulling apart.
Installation Procedure
Important: When installing a new brake modulator assembly, do NOT remove the shipping plugs from the pipe ports until after installation into the
vehicle.