Cavalier L4-2.2L VIN F (2004)
4. Release the park brake cable conduit end fitting (1) from the axle bracket.
5. Remove the left rear tire and wheel assembly.
6. Remove the brake drum.
7. Using a flat-bladed screwdriver, depress the visible retaining tab on the park brake cable fitting, then tilt the released side of the cable end back
into the backing plate.
8. Rotate the park brake cable to expose the other retaining tab.
9. Using a flat-bladed screwdriver, depress the remaining retaining tab on the park brake cable fitting, and release the cable fitting from the backing
plate.
10. Move the majority of the cable return spring back through the opening in the backing plate.
11. Push the cable toward the rear of the vehicle, just enough to clear the cable end from the slot on the park brake lever.
12. Using a flat-bladed screwdriver, lift the cable to fully release the cable from the lever, then remove the cable.
Installation Procedure
