chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Park Brake Cable Replacement - Front|Page 4157 > < Park Brake Cable Replacement - Front|Page 4155
Page 11
background image

1. Secure the front cable (3) conduit end fitting to the cable equalizer (1)
2. Secure the left rear cable end (4) to the cable equalizer (1).
3. Lower the vehicle.
4. Restore the tension to the park brake cable system.

Disabling the Park Brake Cable Automatic Adjuster

Disabling the Park Brake Cable Automatic Adjuster 

1. Remove the floor console. 
2. Ensure that the park brake lever assembly is fully released.
3. Raise and support the vehicle. Refer to Vehicle Lifting.
4. Have an assistant pull and hold the front park brake cable (3) toward the rear of the vehicle to cause the ratcheting cam of the park brake lever

assembly to rotate backwards, against the clock spring.

Park Brake Cable Replacement - Front|Page 4157 > < Park Brake Cable Replacement - Front|Page 4155