Cavalier L4-2.2L VIN F (2004)
Parking Brake Warning Switch: Service and Repair
Park Brake Warning Lamp Switch Replacement
Removal Procedure
1. Remove the console
2. Disconnect the electrical connector (1) from the park brake warning lamp switch.
3. Remove the park brake warning lamp switch mounting screw.
4. Remove the switch.
Installation Procedure
1. Install the park brake warning lamp switch.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the park brake warning lamp switch mounting screw.
^
Tighten the screw to 3 Nm (27 inch lbs.).
3. Connect the electrical connector (1) to the switch.
4. Install the console.
