Cavalier L4-2.2L VIN F (2004)
1. Use a threaded stud in the hub to align the hub to the water pump sprocket.
2. Install the water pump.
Notice: Refer to Fastener Notice in Service Precautions.
3. Install the 2 bolts that secure the water pump to the engine block.
^
Tighten the bolts to 20 Nm (15 ft. lbs.).
4. Install the feed pipe that joins the thermostat housing to the water pump.
5. Install the engine front cover bolt (2) and the bolt (1) that secures the engine block to the water pump.
^
Tighten the bolts to 20 Nm (15 ft. lbs.).
6. Install 2 of the bolts that secure the water pump sprocket to the water pump.
7. Remove the threaded stud.
