Cavalier L4-2.2L VIN F (2004)
21.
Looking at the front of the straight edge, inspect to see if light is protruding through the bottom of the straight edge and the top of the cylinder bore
sleeve flange. If light is present on either side of both sides of the cylinder bore sleeve, the cylinder bore sleeve is cut incorrectly and a new
cylinder bore sleeve needs to be installed.
22.
Looking at the front of the straight edge, inspect to see if light is protruding through the bottom of the straight edge and the top of the cylinder
block deck surface. If light is present on both sides of the cylinder block, the cylinder bore sleeve is cut correctly.
23.
Proceed to the next bore sleeve to be trimmed, repeating steps 10-19 if necessary.
24.
Install the piston and the connecting rod.
25.
Install the oil pan.
26.
Install the cylinder head.
