Cavalier L4-2.2L VIN F (2004)
4. Install the engine mount (2) to bracket bolts (1).
Notice: Refer to Fastener Notice in Service Precautions.
^
Tighten the engine mount to body nuts and the engine mount to bracket bolts to 55 Nm (41 ft. lbs.).
^
Tighten the engine mount bolts to 110 Nm (81 ft. lbs.).
5. Install the A/C low pressure line retaining bracket (1) nut.
^
Tighten the nut to 10 Nm (89 inch lbs.).
6. Install the cruise control module mounting nuts.
^
Tighten the nuts to 10 Nm (89 inch lbs.).
7. Remove the floor jack.
