Cavalier L4-2.2L VIN F (2004)
Crankshaft Main Bearing Seal: Service and Repair
Crankshaft Rear Oil Seal Replacement
^
Tools Required
-
J 42067 Rear Main Seal installer
Removal Procedure
1. Remove the transmission.
2. Remove the flywheel.
Important: Make sure not to damage the outside diameter of the crankshaft or chamber with any tool.
3. Pry the crankshaft rear oil seal with a flat bladed tool.
Installation Procedure
1. Use the J 42607 and install the seal.