Cavalier L4-2.2L VIN F (2004)
3. Install the new exhaust manifold to cylinder head retaining nuts. Follow the tightening sequence.
^
Tighten the nuts to 18 Nm (12 ft. lbs.).
4. Raise and support the vehicle. Refer to Vehicle Lifting.
5. Install a new exhaust manifold to flex coupler gasket (2).
6. Push the flex coupler into position on the exhaust manifold.
Important: Install the new exhaust nuts.
7. Install the retaining nuts (3) which secure the manifold to the flex decoupler (4).
^
Tighten the nuts to 30 Nm (22 ft. lbs.).
8. Lower the vehicle.
9. Install the oxygen sensor.
