Cavalier L4-2.2L VIN F (2004)
Tighten the condenser bolts to 4 N.m (36 lb in).
3. Install the radiator air upper seal onto the flange on the radiator.
4. Install the evaporator tube to the condenser.
5. Install a NEW O-ring seal to the condenser end of the compressor hose assembly.
6. Install the compressor hose assembly to the condenser.
7. Install the fitting nut for the compressor hose assembly to the condenser.
Tighten
Tighten the nut to 16 N.m (12 lb ft).
8. Install the hood latch support.
9. Evacuate and recharge the A/C system.
10. Leak test the fittings of the component using the J 39400-A.
