Cavalier L4-2.2L VIN F (2004)
1. Lightly coat the new orifice tube O-ring seal (4) with mineral base 525 viscosity refrigerant oil.
2. Remove the cap or tape from the evaporator tube.
3. Using needle-nose pliers, CAREFULLY grasp the edge of the expansion (orifice) tube (short filter screen (2) inlet side of tube) without touching
the filter screen and insert the tube (long filter screen (1) outlet side first) fully into the evaporator line.
4. Using a lint-free clean, dry cloth, carefully clean the sealing surfaces of the tube fittings.
5. Install a new O-ring seal on the condenser tube.
Coat the O-ring seal with 525 viscosity refrigerant oil.
6. Install the evaporator tube.
7. Evacuate and recharge the A/C system.
8. Leak test the fittings of the component using the J 39400-A.
9. Install the hood close out filler panel.
