chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Disabling and Enabling|Page 8161 > < Disabling and Enabling|Page 8159
Page 7
background image

7. Disconnect the inflatable restraint IP module inline connector.

Zone 6 (Coupe)

1. Turn the steering wheel so that the vehicle's wheels are pointing straight ahead.
2. Turn the ignition switch to the OFF position.
3. Remove the key from the ignition switch.
4. Remove the LH IP outer trim cover. 
5. Remove the AIR BAG Fuse from the LH IP wiring harness junction block.

IMPORTANT:  With the AIR BAG Fuse removed and the ignition switch in the RUN position, the AIR BAG warning lamp illuminates. This is a
normal operation and does not indicate an SIR system malfunction.

6. Remove the RH door trim panel (2). 

Disabling and Enabling|Page 8161 > < Disabling and Enabling|Page 8159