Cavalier L4-2.2L VIN F (2004)
Cargo Lamp: Service and Repair
CARGO LAMP REPLACEMENT
REMOVAL PROCEDURE
1. Open the rear compartment.
2. Remove the rear compartment lamp from the rear shelf using a small flat-bladed tool to release the retainers.
3. Disconnect the electrical connector (3) from rear compartment lamp (2).
4. Remove the bulb from the rear compartment lamp.
INSTALLATION PROCEDURE
1. Install the bulb to the rear compartment lamp (1).
2. Connect the electrical connector (3) to the rear compartment lamp.
3. Install the rear compartment lamp to the rear shelf pressing into place until fully seated.
4. Close the rear compartment.
