Cavalier L4-2.2L VIN F (2004)
Turn Signal Cancel Cam: Service and Repair
TURN SIGNAL CANCEL CAM AND UPPER BEARING THRUST WASHER
TOOLS REQUIRED
-
J 23653-SIR Steering Column Lock Plate Compressor
-
J 42137 Cam Orientation Plate Adapter
REMOVAL PROCEDURE
1. Disable the SIR system. Refer to SIR Disabling and Enabling Zone 3 in Restraint Systems.
See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Air Bag(s) Arming and Disarming
CAUTION: Refer to SIR Caution in Service Precautions.
See: Service Precautions/SIR Caution
2. Remove the SIR coil.
3. Remove and discard the bearing retainer using J 23653-SIR and J 42137.
4. Remove the shaft lock (1).
5. Remove the turn signal cancel cam (2).
6. Remove the upper bearing spring (3).
7. Remove the upper bearing inner race (4).
INSTALLATION PROCEDURE
