chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Disabling and Enabling|Page 1296 > < Disabling and Enabling|Page 1294
Page 12
background image

6. Install the CPA to the inflatable restraint steering wheel module coil connector, located under the instrument panel, left of the steering column.

7. Connect the side impact module - LF connector located under the driver seat.
8. Install the CPA to the inflatable restraint side impact module - LF connector.
9. Connect the side impact module - RF connector located under the passenger seat.

10. Install the CPA to the inflatable restraint side impact module - RF connector.

11. Install the AIR BAG Fuse to the LH IP wiring harness junction block.
12. Install the LH IP outer trim cover. 
13. Staying well away from both air bags, turn ON the ignition.

13.1. The AIR BAG indicator will flash 7 times.
13.2. The AIR BAG indicator will then turn OFF.

Disabling and Enabling|Page 1296 > < Disabling and Enabling|Page 1294