Cavalier L4-2.2L VIN F (2004)
Notice: Over torquing the oil filter cap may cause damage to the oil filter cap resulting in an oil leak.
Notice: Refer to Fastener Notice in Service Precautions.
4. Use a 32 mm (1 1/4 inch) socket (1) on the hex on the top of the oil filter cap, or an Oil Filter Wrench on the outside diameter of the oil filter cap.
^
Tighten the oil filter cap until fully seated, DO NOT exceed 25 Nm (18 ft. lbs.).
5. Install the oil pan drain plug.
^
Tighten the oil pan drain plug to 25 Nm (18 ft. lbs.).
6. Lower the vehicle.
7. Fill the engine with oil.