Cavalier L4-2.2L VIN F (2004)
11. Lower the vehicle.
12. Remove the evaporator tube (4).
INSTALLATION PROCEDURE
1. Install the evaporator tube (4).
2. Raise and support the vehicle. Refer to Vehicle Lifting.
3. Install the evaporator tube to the evaporator. Use new O-ring seals.
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten
Tighten the fitting to 24 N.m (18 lb ft).
4. Lower the vehicle.
5. Install the tube to the retraining clip (6) located on the body side rail (2.4L only).
6. Install the evaporator tube to the condenser (3). Use the new O-ring seals.
Tighten
Tighten the nut to 16 N.m (12 lb ft).
7. Install the accumulator tube.
