Cavalier L4-2.2L VIN F (2004)
1. Install the power steering pressure hose (3) to the vehicle.
NOTE:
Refer to Installing Hoses Without Twists or Bends Notice in Service Precautions.
See: Steering and Suspension/Service Precautions/Vehicle Damage Warnings/Installing Hoses Without Twists or Bends Notice
2. Install the power steering pressure hose (3) to the power steering pump pipe (4).
NOTE:
Refer to Fastener Notice in Service Precautions.
See: Steering and Suspension/Service Precautions/Vehicle Damage Warnings/Fastener Notice
Tighten
Tighten the fitting to 27 N.m (20 lb ft).
3. Install the upper air cleaner assembly.
4. Raise the vehicle on a hoist. Refer to Vehicle Lifting.
5. Install the front exhaust pipe, if removed.
6. Install the power steering pressure hose (1) to the power steering gear (3).
Tighten
Tighten the fitting to 27 N.m (20 lb ft).
7. Lower the vehicle.
8. Bleed the power steering system. Refer to Bleeding the Power Steering System.
