Cavalier L4-2.2L VIN F (2004)
1. Install the power steering return hose (2) to the vehicle.
NOTE:
Refer to Installing Hoses Without Twists or Bends Notice in Service Precautions.
See: Steering and Suspension/Service Precautions/Vehicle Damage Warnings/Installing Hoses Without Twists or Bends Notice
2. Install the power steering return hose (2) to the power steering gear (3).
NOTE:
Refer to Fastener Notice in Service Precautions.
See: Steering and Suspension/Service Precautions/Vehicle Damage Warnings/Fastener Notice
Tighten
Tighten the fitting to 27 N.m (20 lb ft).
3. Install the front exhaust pipe, if removed.
4. Lower the vehicle.
5. Install the power steering return hose (2) and the clamp (5) to the power steering pump (1).
6. Install the upper air cleaner assembly.
7. Bleed the power steering system. Refer to Bleeding the Power Steering System.
