Cavalier L4-2.2L VIN F (2004)
2. Position the chassis purge pipe in the body clips.
3. Install the fuel bundle mounting bolts into the body clips.
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten
Tighten the bolts to 6 N.m (53 lb in).
4. Install the exhaust heat shield.
Tighten
-
Tighten the exhaust shield bolt to 2 N.m (18 lb in).
-
Tighten the exhaust shield nuts to 1 N.m (9 lb in).
5. Remove the caps on the chassis purge pipe and canister purge pipe.
6. Connect the chassis purge pipe to the canister purge pipe.
7. Lower the vehicle.
8. Remove the caps on the engine purge pipe and chassis purge pipe.
9. Connect the chassis purge pipe to the engine purge pipe.