Cavalier L4-2.2L VIN F (2004)
Tighten the bolts to 25 Nm (18 lb ft).
27.
Remove the rear seat cushion retainers from the brackets on the floor and install them to the frame on the bottom of the seat cushion as shown (3).
28.
Install the rear seat cushion to the vehicle and press firmly until the retainers are fully seated.
29.
Connect the center seat belt retractor latch plate to the seat belt buckle.
30.
Close the rear compartment lid.
Four Door Sedan Model
1.
From the rear seat, release the center seat belt retractor latch plate (5) from the seat belt buckle.
2.
From the trunk, release both rear seat backs by pulling on the straps and allowing the seat backs to fold forward and lay flat.
3.
From the rear seat remove the rear quarter upper trim (1) and insulator on both sides of the vehicle by pulling firmly and evenly to disengage the
