Cavalier L4-2.2L VIN F (2004)
Weld Nut and Bolt Replacement
This replacement procedure should only be performed is the results of the inspection procedure indicate that the replacement of the weld nut and bolt is
required. Perform this procedure only if the diameter is 2 mm (1/16 in) smaller on the RIGHT side.
Two-Door Coupe Model
1.
Release both rear seat backs by pulling on the straps.
2.
From inside the vehicle, release the center seat belt retractor latch plate (5) from the seat belt buckle.
3.
Remove the rear seat cushion.
4.
Remove the 2 nuts and 2 bolts attaching the rear seat backs and mounting bracket to the vehicle, and remove the seat back and bracket assembly.
