Cavalier L4-2.2L VIN F (2004)
7.
Remove the bolt (1) attaching the right side retractor to the rear shelf panel.
8.
Lift up and reposition the right seat belt retractor.
9.
From inside the trunk, remove the 8 mm weld nut (1) from the underside of the shelf panel.
10.
Position the right seat belt retractor back to the original mounting location.
11.
Apply threadlocker to the threads of the new bolt and insert the bolt through the seat belt retractor and hole in the shelf panel.
12.
From inside the rear compartment, install the NEW nut on the bolt.
Tighten
Tighten the bolt to 28 Nm (21 lb ft).
13.
Route the seat bolt webbing material through the slots and install the rear shelf trim panel.
14.
Install the bezels for the child tether anchors and the center seat belt retractor.
