Cavalier L4-2.2L VIN F (2004)
Seat Belt Buckle: Service and Repair
Seat Belt Buckle Replacement - Rear
REMOVAL PROCEDURE
1. Remove the rear seat cushion.
2. Remove the nut from the rear seat belt buckles.
3. Remove the seat belt buckles from the floor pan studs.
INSTALLATION PROCEDURE
1. Position the seat belt buckles to the floor pan studs.
2. Install the rear seat belt buckle nut.
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten
Tighten the nut to 50 N.m (37 lb ft).
3. Install the rear seat cushion.