Cavalier L4-2.2L VIN F (2004)
2. Connect the side impact sensor connector (4).
3. Install the CPA (3) to the side impact sensor connector (4).
4. Install the side impact sensor (1) to the door (4).
5. Align the locating pin on the sensor (1) to the opening in the door (4).
Begin tightening the side impact sensor bolts (2).
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten
Tighten the fasteners to 10 N.m (89 lb in).
6. Install the water deflector to the door.
7. Install the door trim panel.
8. Enable the SIR system. Refer to SIR Disabling and Enabling Zone 9 , or SIR Disabling and Enabling Zone 7.
