chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Disabling and Enabling|Page 4741 > < Disabling and Enabling|Page 4739
Page 6
background image

Zone 5

1. Remove the key from the ignition switch.
2. Connect the inflatable restraint IP module inline connector located under the instrument panel, left of the steering column.

Passenger Shorting Bar

3. Install the connector position assurance (CPA) to the inflatable restraint IP module inline connector.

4. Install the AIR BAG Fuse to the LH IP wiring harness junction block.
5. Install the LH IP outer trim cover. 
6. Staying well away from both air bags, turn ON the ignition.

6.1.

The AIR BAG indicator will flash 7 times.

6.2.

The AIR BAG indicator will then turn OFF.

7. Perform Diagnostic System Check - Restraint Systems if the AIR BAG indicator does not operate as described.

Disabling and Enabling|Page 4741 > < Disabling and Enabling|Page 4739