Cavalier L4-2.2L VIN F (2004)
8. Remove the lower control arm front (5) and rear (4) mounting bolts.
9. Remove the lower control arm (2) from the vehicle and place in a vice.
10. Drill out the 3 rivets (3) retaining the ball joint to the lower control arm (2).
Use a 3 mm (1/8 in) drill bit in order to make a pilot hole through the rivets.
Finish drilling the rivets with a 13 mm (1/2 in) drill bit.
11. Remove the ball joint (4) from the control arm (2).
INSTALLATION PROCEDURE
