Cavalier L4-2.2L VIN F (2004)
11.
Install the new strainer from kit, P/N 88967293, as shown above until you hear a positive click sound.
12.
Double check that the strainer is installed properly and there is no damage to the pot before reinstalling the fuel module.
Important:
DO NOT reuse the old fuel pump module seal.
13.
Remove the old fuel pump module seal from the fuel module.
Important:
The strainer kit, P/N 88967293, includes two new seals. It is critical that the same design seal be reinstalled that was removed.
14.
Install the same design seal from kit, P/N 88967293, that was removed from the fuel pump module.
15.
Reinstall the fuel pump module into the fuel tank. Refer to Fuel Pump Module Replacement in SI. Use the appropriate SI Document depending on
