Cavalier L4-2.2L VIN F (2004)
1. Install the transaxle oil cooler pipes.
Notice: Refer to Fastener Notice in Service Precautions
2. Install the transaxle oil cooler pipe clip bolt.
Tighten the transaxle oil cooler pipe clip bolt to 4 Nm (27 inch lbs.).
3. Install the transaxle oil cooler pipe fittings at the radiator.
Tighten the transaxle oil cooler pipe fittings to 45 Nm (33 ft. lbs.).
4. Install the transaxle oil cooler hoses to the pipes.
5. Lower the vehicle.
Notice: Do NOT overfill the transaxle. The overfilling of the transaxle causes foaming, loss of fluid, shift complaints, and possible damage to the
transaxle.
6. Adjust the transmission fluid level.
7. Inspect for proper completion of the repairs.
8. Inspect for fluid leaks.
