Cavalier L4-2.2L VIN F (2004)
1. Clean and inspect the oil pan for dents or damage. Dry the oil pan before installation.
2. Install the oil pan gasket. Use a new gasket if the sealing ribs are damaged.
3. Install the oil pan. Replace the bottom pan it damaged.
Notice: Refer to Fastener Notice in Service Precautions
4. Install the oil pan attaching bolts.
Tighten the bolts to 14 Nm (124 inch lbs.).
5. Lower the vehicle.
6. Fill the transmission.
7. Inspect the transmission fluid level.
8. Inspect the oil pan gasket for leaks.
