Cavalier L4-2.2L VIN F (2004)
Pressure Regulating Solenoid: Service and Repair
Pressure Control Solenoid (PCS) Replacement
Removal Procedure
Important: Retainer clips hold in each of the valve line-ups. Use a small screwdriver in order to remove the retainer clips. Be careful not to score the
valve body when removing the retainer clips and valves. Before removing the valve line-ups, inspect each valve line-up for freedom of movement.
1. Remove the transmission side cover.
2. Remove the Pressure Control Solenoid (PCS) retainer clip (304), the PCS with two O-rings and screen (312, 309, 310), the torque signal regulator
valve (309), and the torque signal regulator spring (308).
Installation Procedure
1. Install the torque signal regulator spring (308), the torque signal regulator valve (309), the Pressure Control Solenoid (PCS) with two O-rings and
screen (312, 309, 310) and the PCS retainer clip (304).
2. Install the transmission side cover.
