Cavalier L4-2.2L VIN F (2004)
8. Attach the J 41398 to the threaded area of the outer race (2).
9. Attach J2619-01 onto the outer end of the J 41398.
10. Use the J 2619-01 to remove the CV joint from the halfshaft bar.
11. Remove J2619-01 and J41398from the CV joint.
Important: Never reuse the retaining ring.
12. Remove the retaining ring from the halfshaft bar. Discard the retaining ring.
13. Remove the CV joint seal (1) from the halfshaft bar.
14. Place a brass drift against the CV joint cage (1)
15. Tap gently on the brass drift with a hammer in order to tilt the cage (1).
16. Remove the first chrome alloy ball (2) when the CV joint cage (1) tilts.
17. Tilt the CV joint cage (1) in the opposite direction to remove the opposing chrome alloy ball (2).
18. Repeat this process to remove all six of the balls.
